TRO-REEL
Jointless installation of up to 100m.
Tro-Reel is a single-lead insulated trolley, so it’s easy to set up. Since it’s possible to set up as much as a 100m Tro-Reel without any joints, it’s easier to install a wide range of special power source routes. Various types available: 60A, 150A, 200A, 300A and 150A stainless steel units for places where corrosion resistance is necessary.
TRO-REEL
300A Tro-Reel unit (for indoor and outdoor use)
●Rating 600V, 300A ●Conductor material Copper 70㎟ ●Insulating sheath material Rigid PVC (heat resistance: 95℃) Orange (hazard color), Munsell 2.5YR 6/13
| Cat. No. | Product | Carton dimensions (mm) | Weight(kg) |
|---|---|---|---|
| DH5470 | 100m coil | 1475×1475×50 | 80.0 |
| DH5478 | 80m coil | 1340×1340×50 | 64.8 |
| DH5476 | 60m coil | 1340×1340×50 | 48.6 |
| DH5474 | 40m coil | 1140×1140×50 | 33.4 |
| DH5471 | 10m coil | 1000×1000×50 | 8.6 |
200A Tro-Reel unit (for indoor and outdoor use)
●Rating 600V, 200A ●Conductor material Copper 46㎟ ●Insulating sheath material Rigid PVC (heat resistance: 75℃) Orange (hazard color), Munsell 2.5YR 6/13
| Cat. No. | Product | Carton dimensions (mm) | Weight(kg) |
|---|---|---|---|
| DH5440 | 100m coil | 1475×1475×50 | 59.0 |
| DH5448 | 80m coil | 1340×1340×50 | 48.0 |
| DH5446 | 60m coil | 1340×1340×50 | 37.0 |
| DH5444 | 40m coil | 1140×1140×50 | 26.0 |
| DH5441 | 10m coil | 1000×1000×50 | 6.4 |
150A Tro-Reel unit (for indoor and outdoor use)
●Rating 600V, 150A ●Conductor material Copper 30㎟ ●Insulating sheath material Rigid PVC (heat resistance: 75℃) Orange (hazard color), Munsell 2.5YR 6/13
| Cat. No. | Product | Carton dimensions (mm) | Weight(kg) |
|---|---|---|---|
| DH5450 | 100m coil | 1475×1475×50 | 45.0 |
| DH5458 | 80m coil | 1340×1340×50 | 36.0 |
| DH5456 | 60m coil | 1340×1340×50 | 28.0 |
| DH5454 | 40m coil | 1140×1140×50 | 20.0 |
| DH5451 | 10m coil | 1000×1000×50 | 5.4 |
60A Tro-Reel unit (for indoor and outdoor use)
●Rating 600V, 60A ●Conductor materials Steel (22.5㎟) + Copper (15㎟) ●Insulating sheath material Rigid PVC (heat resistance: 75℃) Orange (hazard color), Munsell 2.5YR 6/13
| Cat. No. | Product | Carton dimensions (mm) | Weight(kg) |
|---|---|---|---|
| DH5460 | 100m coil | 1475×1475×50 | 47.0 |
| DH5468 | 80m coil | 1340×1340×50 | 39.0 |
| DH5466 | 60m coil | 1340×1340×50 | 29.0 |
| DH5464 | 40m coil | 1140×1140×50 | 21.0 |
| DH5461 | 10m coil | 1000×1000×50 | 5.0 |
150A stainless steel coiled Tro-Reel unit
●Conductor materials Copper (30㎟) + Stainless steel (5.2㎟) ●Insulating sheath material Rigid PVC (heat resistance: 75℃) Orange (hazard color), Munsell 2.5YR 6/13
| Cat. No. | Product | Carton dimensions (mm) | Weight(kg) |
|---|---|---|---|
| DH5450S | 100m coil | 1475×1475×50 | 45.0 |
| DH5458S | 80m coil | 1340×1340×50 | 37.0 |
| DH5456S | 60m coil | 1340×1340×50 | 27.5 |
| DH5454S | 40m coil | 1140×1140×50 | 19.7 |
| DH5451S | 10m coil | 1000×1000×50 | 5.5 |
Click here for details of products and installation.
Parts
End tension insulator
(with feed-in terminal and φ5mm knock pin) This insulator applies tension to the end of the Tro-Reel to absorb expansion and contraction due to temperature fluctuations. A feed-in terminal is provided for power input.
Fixed end insulator (with bolt)
(with securing terminal and φ5mm knock pin) Mounted onto the end of the Tro-Reel unit to apply tension. Equipped with a lock bolt. Cannot be used for supplying power. For 60A, 150A, 200A, and 300A.
hanger
This hanger is a support bracket used to attach the Tro-Reel units to a building structure.
Joiner
Used to connect Tro-Reel units.
(Feed-in terminal not included.)
Center feed-in joiner
(with feed-in terminal and φ5mm knock pin) Used to feed power from anywhere on the line and connect the Tro-Reel units.
Intermediate tension insulator
Used for intermediate tension support on circular lines and straight lines longer than 100m. It absorbs expansion and contraction due to temperature fluctuations.
Guide cap
This guide cap guides the collector arm during transfers via turntables, traversers and similar applications. For 60A, 150A, 200A, and 300A.
Collector arm
Attached to the moving equipment and used to supply power from the Tro-Reel unit to the equipment.
Spacer
Used as a backing support for the Tro-Reel to prevent shifting and inclination.
For 60A, 150A, 200A, and 300A.
Straightener
Used to straighten the Tro-Reel unit when removed from the coil package.
For 60A, 150A, 200A, and 300A.
Sheath cutter for Tro-Reel
This labor-saving tool makes it possible to cut the insulating sheath of the Tro-Reel units with just one hand.
Note: Not for use with the 300A type Tro-Reel.
Conductor cleaner (with arm)
Used to clean the Tro-Reel conductor surfaces. Mount the cleaner on the collector arm mount rods for periodic cleaning.
Click here for details of products and installation.
Replacement Parts
Collector shoe
●Material : Copper base sintered alloy
Collector head holder
Sheath repair cover
For 60A, 150A, 200A, and 300A.
Click here for details of products and installation.