Outdoor-type Trolley Ducts
<Lineup>
・30A・60A 300V AC
・100A 600V AC
The rain-proof construction makes these Trolley Ducts suitable for outdoor installations.
We have straight-line ducts, drop-out ducts with an opening for trolley insertion and removal, and horizontally curved ducts.
Note: Avoid installation in coastal areas.
Outdoor-type Trolley Ducts
Straight-line ducts
●3P・5P 30A・60A／3P 100A ●Coupling plate set, conductor splice and cover included. ●Hot-dipped galvanized steel
| Cat. No. | Type | Rating | Standard length(ℓ) | Weight (kg) |
|---|---|---|---|---|
| DH6533 | 602 | 3P30A | 3,000 | 9.3 |
| DH6553 | 1004 | 5P30A | 3,000 | 15.3 |
| Cat. No. | Type | Rating | Standard length(ℓ) | Weight (kg) |
|---|---|---|---|---|
| DH6633K2 | 602 | 3P60A | 3,000 | 9.3 |
| DH6653K2 | 1004 | 5P60A | 3,000 | 15.3 |
| Cat. No. | Type | Rating | Standard length(ℓ) | Weight (kg) |
|---|---|---|---|---|
| DH6933K2 | 1004 | 3P100A | 3,000° | 15.0 |
Drop-out ducts
An opening is provided for trolley insertion and removal. A drop-out duct must be used for each line. For extended lines, a drop-out duct is used for every 20m.
●3P・5P 30A・60A／3P 100A ●Coupling plate set, conductor splice and cover included. ●Hot-dipped galvanized steel
| Cat. No. | Type | Rating | Standard length( ℓ ) | Weight (kg) |
|---|---|---|---|---|
| DH6571K | 602 | 3P30A | 1,000 | 3.3 |
| DH6591 | 1004 | 5P30A | 1,000 | 5.3 |
| Cat. No. | Type | Rating | Standard length( ℓ ) | Weight (kg) |
|---|---|---|---|---|
| DH6671K2 | 602 | 3P60A | 1,000 | 3.3 |
| DH6691K2 | 1004 | 5P60A | 1,000 | 5.3 |
| Cat. No. | Type | Rating | Standard length( ℓ ) | Weight (kg) |
|---|---|---|---|---|
| DH6943K2 | 1004 | 3P100A | 1,000 | 5.2 |
Horizontally curved ducts
Note: Custom-made products.
●3P・5P 30A・60A／3P 100A ●Coupling plate set, conductor splice and cover included. ●Hot-dipped galvanized steel
| Type | Rating | Minimum R | Available duct length ℓ |
|---|---|---|---|
| 602 | 3P30A | 20A trolley : 800㎜ | 500㎜(min.) to 1800㎜(max.) |
| 40A trolley : 1,000㎜ | |||
| 1004 | 5P30A | 20A trolley : 1,000㎜ |
| Type | Rating | Minimum R | Available duct length ℓ |
|---|---|---|---|
| 602 | 3P60A | 20A trolley : 800㎜ | 500㎜(min.) to 1800㎜(max.) |
| 40A trolley : 1,000㎜ | |||
| 1004 | 5P60A | 20A trolley : 1,000㎜ |
| Type | Rating | Minimum R | Available duct length ℓ |
|---|---|---|---|
| 1004 | 3P100A | 40A trolley : 1,000㎜ | 500㎜(min.) to 1800㎜(max.) |
| 80A trolley : 2,500㎜ |
Click here for details of products and installation.
Parts
Feed-in boxes
We also have center feed-in boxes.
End caps
Hangers
We also have hangers for traversing cranes, point ducts, pick-up ducts, and other places where vibration or misalignment may occur.
Trolleys
We have standard trolley and outdoor-type trolley.
Trolley-pulling brackets
Used with a pull-type trolley.
Coupling fixture A
For coupling two trolleys.
Conductor cleaners
Used for cleaning the conductor surface. It should regularly be run over the conductor surface.
Note: When using the cleaner, be sure to switch off power to prevent possible short circuits.
Conductor splice
Click here for details of products and installation.
Replacement Parts
Trolley collectors
Trolley collectors make direct contact with conductors for collecting
power. Worn-out collectors should be replaced.
Note: One set contains the number of collectors needed for one trolley (two for 2P
type, three for 3P type, etc).
Conductor cleaner pads
Accessory sets for connections
A set consists of coupling plates and conductor splice.
Note: Custom-made products.
Click here for details of products and installation.